“Art Metal” is an innovative two-component decorative system by Kraski Breez, engineered to replicate the authentic look, feel, and reflectivity of real polished metal—without using actual metal sheets.
The coating contains natural metallic particles (copper, bronze, steel, or silver, depending on the selected base), which, when combined with a special acrylic hardener, form a dense, mirror-like surface that captures light with striking realism.
Beyond aesthetics, “Art Metal” behaves like real metal—it can oxidize, tarnish, and react chemically, enabling controlled artistic aging through the “Catalana” patination system (Kraski Breez).
System Composition
- Component A: Metallic powder (pure metal particles)
- Component B: Special acrylic hardener base
✅ After mixing, the material forms a cohesive, metal-like film with genuine physical and chemical properties of metal.
Key Features
- Realistic metallic appearance: deep gloss, reflectivity, and tactile authenticity
- Artistic versatility: compatible with intentional patina, rust, and corrosion effects via “Catalana” activators
- Breathable: vapour-permeable, preserving wall “breathing”
- Odour-neutral: does not absorb smells
- Eco-friendly: safe for residential, commercial, and public interiors
- Ideal for: decorative walls, furniture, art installations, restoration, and high-end architectural details
Substrate Requirements
Apply to properly prepared mineral surfaces:
- Concrete, concrete blocks
- Brick masonry
- Cement render and plasters
- Gypsum, gypsum board, gypsum panels
Surface must be:
- Uniform
- Smooth and leveled
- Dry
- Clean and dust-free
Preparation:
- Remove loose or weak layers
- Repair cracks with plaster or spackling
- Sand with fine-grit paper
- Dust thoroughly with brush or vacuum
Required surface quality: Category Q3 (DIN 18364)
Recommended Application System & Consumption
- Universal Deep-Penetration Primer – WD-AC-007
- Purpose: Consolidation, dust-proofing, adhesion
- Coverage: 0.1–0.2 kg/m²
- Layers: 1
- Quartz Adhesion Primer – WD-AC-558
- Purpose: Creates a textured bonding layer
- Coverage: 0.15–0.3 kg/m²
- “Art Metal” Decorative Coating – WD-AC-469
- Coverage: 0.4–1.0 kg/m²
Depends on:- Chosen metal type
- Layer thickness
- Desired gloss intensity and texture
- Application: By trowel, spatula, or specialized metal-finishing tools
- Layers: Typically 1–2, applied while wet for seamless blending
- Coverage: 0.4–1.0 kg/m²
Patina & Artistic Finishing
- To create antique, industrial, or art-deco effects, use “Catalana” activators (e.g., rust, verdigris, black oxide).
- Reactions begin within minutes and evolve over hours—allowing full creative control.
⚠️ If patina is NOT desired, seal the cured surface with a clear protective topcoat (e.g., acrylic or polyurethane varnish) to prevent unintended oxidation.
Maintenance
After full curing (48–72 hours):
- Clean with damp cloth and neutral pH cleaners
Avoid:
- Acidic or alkaline cleaners
- Abrasive scrubbers
- Aggressive solvents
These may trigger uncontrolled corrosion or damage the delicate metal layer.
Shelf Life
- 12 months from production date
- Store Components A and B separately in original, tightly sealed containers
- Keep in a dry place at +5°C to +25°C
Design Potential
“Art Metal” transcends decoration—it’s a true artistic medium. Transform:
- Feature walls into bronze panels
- Furniture into polished steel sculptures
- Ceilings into copper domes
- Art objects into oxidized relics
Perfect for luxury residences, boutiques, museums, hotels, and bespoke interiors where realism, depth, and emotional impact are paramount.
“Art Metal” WD-AC-469 – not just a coating, but a canvas of living metal.
| Kraski Breez – Where Metal Comes Alive
