Metallic Enamel WD-AC-617
Glossy metal-effect coating with patina for interiors and façades | Kraski Breez
Purpose
Metallic Enamel WD-AC-617 is a decorative-functional coating designed to realistically imitate polished metals—such as steel, grey metallic, and other refined metallic shades. It creates a high-gloss, reflective finish with exceptional visual depth and authentic light play, closely resembling genuine metal surfaces.
It can be used:
- As a standalone decorative finish,
- In combination with other products from the Kraski Breez line.
A distinctive feature: the dried coating can be artificially aged using corrosion activators from the “Catalana” system (Kraski Breez), enabling controlled rust, oxidation, or patina effects—ideal for industrial, vintage, or artistic installations.
Suitable for both interior and exterior applications.
Approved for use in children’s rooms when applied and maintained according to guidelines.
Key Features
- Wear-resistant – withstands mechanical stress
- Eco-friendly – safe for health and the environment
- Odor-neutral – does not absorb smells
- Water- and wash-resistant – suitable for high-humidity areas (bathrooms, kitchens, facades)
- Authentic metallic look – deep gloss with realistic light reflection
- Compatible with the “Catalana” system – enables artistic patina and rust effects
Technical Specifications
- Composition: Acrylic resin, water, wax, metallic pigments
- Default color: Steel / grey metallic
- Tinting base: BW (white)
- Color range: Tintable into 20 metallic shades
- Finish: Glossy
- Thinner: Water (if needed)
- Solvent type: Water-based
- Substrates: Mineral surfaces—plaster, stucco, concrete, brick, gypsum board, etc.
- Application: Interior & exterior
- Drying time: ~12 hours (at 20°C, 65% RH)
- Full cure: 24–48 hours
- Shelf life: 12 months in sealed factory packaging
- Country of origin: Russia
- Packaging: Plastic can
- Dimensions: 11 × 11 × 12 cm (L × W × H)
Surface Preparation Requirements
Apply only to properly prepared mineral substrates:
- Concrete, concrete blocks, brickwork
- Cement-based plasters and renders
- Gypsum, gypsum board, gypsum panels
Surface must be:
- Uniform
- Smooth and leveled
- Dry
- Clean and dust-free
Mandatory prep steps:
- Remove loose or flaking material
- Fill cracks and defects with plaster or spackling compound
- Sand filled areas with fine-grit sandpaper
- Thoroughly dust with a soft brush or vacuum
Coverage
- 0.1–0.15 kg/m², depending on:
- Surface texture and profile
- Substrate absorbency
- Number of layers
- Desired intensity of the metallic effect
Recommended: Apply 1–2 coats for optimal visual depth and uniformity.
Maintenance
After full curing, the surface may be cleaned with a damp cloth and neutral pH household cleaners.
Avoid:
- Acidic cleaners
- Caustic (alkaline) agents
- Abrasive scrubbers
These may damage the metallic layer or cause discoloration.
Creative Application Note
To achieve rust, oxidation, or antique patina effects, use specialized activators from the “Catalana” system (Kraski Breez). These trigger a controlled corrosion process on the enamel surface, transforming walls, furniture, or art installations into industrial-chic or vintage metal masterpieces.
Metallic Enamel WD-AC-617 is an innovative solution for designers, architects, and artisans—merging the raw elegance of industrial metal with practical durability and unlimited creative potential. Turn any surface into a statement art object with the authentic look of aged or polished metal.
Копировать
Спроси
Объяснить
Перевести(ru-RU)
