Decorative Acrylic Water-Dispersion Paint "Pearlescent Coke" (VD-AK-603)
Product Description "Pearlescent Coke" is a unique, effect-rich decorative coating formulated with pearlescent particles and special microgranules. The material creates a vibrant, pleasantly smooth matte surface with a noble inner glow effect. Thanks to its high density, it perfectly holds the height of the relief. Note: The pearlescent base of this line features increased density and an enhanced glow effect due to the use of various fractions of decorative particles.
Key Features Wear resistance: high resistance to mechanical stress. Eco-friendliness: safe water-dispersion formulation. Seamless finish: creates an absolutely seamless, monolithic coating. Hygiene: does not absorb odors. Moisture resistance: resistant to moisture, suitable for humid environments.
Application System and Material Consumption To achieve the optimal result, the following preparation and application scheme is recommended:
|
Stage |
Material |
Purpose |
Consumption |
Application Recommendations |
|---|---|---|---|---|
|
1. Priming |
Universal Deep Penetration Primer VD-AK-007 |
Improves adhesion, strengthens, and dust-proofs the substrate. |
~0.1–0.2 kg/m² (on smooth surfaces) |
Apply in 1 coat. Consumption may vary depending on the roughness, porosity, and absorbency of the surface. |
|
2. Background Prep |
Primer-Paint VD-AK-115 |
Creates a uniform background before the final coat, provides additional adhesion. |
~0.1–0.2 kg/m² (on smooth surfaces) |
Recommended to apply in 1–2 coats. |
|
3. Finish Coat |
Decorative Paint "Pearlescent Coke" VD-AK-603 |
Creates the final decorative effect. |
~0.15–0.2 kg/m² |
Apply in 2 coats to fully reveal the glow effect and density. |
Surface Requirements and Preparation The material is applied to previously prepared mineral substrates: concrete, concrete blocks, brickwork, cement, cement plaster, gypsum, and gypsum or fiber gypsum boards (drywall). Substrate Preparation Checklist:
- The surface must be uniform, leveled, dry, and clean.
- Remove all loose particles and peeling layers of old coatings.
- Level cracks, chips, and irregularities using high-quality plastering or putty compounds.
- Sand the puttied areas with fine-grit sandpaper.
- Thoroughly remove dust using a soft brush or a shop vacuum.
- The surface preparation quality must meet category Q3 (high-quality putty finish for directional lighting). 🧽 Coating Care
Allowed: wet cleaning using mild household detergents.
Prohibited: use of acid-based or caustic aggressive cleaners (they may cause staining and damage the decorative layer).
Shelf Life and Storage
12 months from the date of manufacture.
Store in unopened factory packaging, in a place protected from direct sunlight and freezing temperatures.
