Hydrophobizing Gel WD-AC-610
A premium, water-based protective topcoat by Kraski Breez, engineered to seal, enhance, and preserve high-end decorative finishes while maintaining natural breathability. Formulated with pure acrylic, silicone dispersion, latex, and wax, it delivers invisible yet robust protection against moisture, stains, abrasion, and aging—without masking the original texture or color.
Ideal as a final layer for microconcrete, microcement, Venetian plasters, structural renders, and all decorative coatings from the Kraski Breez line—including floors, walls, façades, and countertops.
The gel forms a silky, soft-to-the-touch film with a refined Soft-Feel effect, available in matte (for natural elegance) or gloss (for luminous depth). It also accepts polishing to achieve a smooth, luxurious finish.
Key Properties
✔ Wear-resistant – suitable even for floor applications
✔ Eco-friendly – safe for children, homes, and sensitive environments
✔ Vapor-permeable – preserves the “breathing” capability of mineral substrates
✔ Water-repellent – prevents capillary moisture uptake and water damage
✔ Odor-resistant
✔ Polishable – enables a refined, satin-smooth final appearance
✔ Approved for use in residential, childcare, healthcare, educational, and public facilities (Building Types A, B, C)
Technical Specifications
- Base: Water
- Binders: Pure acrylic + silicone dispersion + latex
- Additives: Wax
- Color: Transparent (can be tinted for subtle tonal effects)
- Finish options: Matte or Gloss
- Ready to use: Yes (not a concentrate)
- Thinner: Clean water
- Dry to touch: ~12 hours (at 20°C, 65% RH)
- Full cure: 24–48 hours
- Shelf life: 12 months in sealed original packaging
- Made in: Russia
Application Areas
Apply as a topcoat on:
• Microconcrete & microcement (floors, walls, façades, countertops)
• Venetian & structural plasters
• All Kraski Breez decorative paints and textured finishes
Suitable for:
• Interiors & exteriors
• Wet zones (bathrooms, kitchens, pools)
• High-traffic public and residential spaces
Surface Requirements
- Must be fully dry, clean, and dust-free
- Free of grease, residues, or loose particles
- For floors: light sanding and dust removal recommended before application
Consumption & Application
- Consumption: 0.05–0.15 kg/m² per layer
(varies based on surface roughness, porosity, and number of coats) - Recommended: 1–2 layers for optimal protection and aesthetic finish
- Apply with roller, brush, or airless sprayer; polish after drying if desired
Maintenance
- Wet cleaning permitted after full curing with neutral pH detergents
- Avoid:
• Acidic or alkaline cleaners
• Abrasive scrubbing agents
• Harsh solvents
These may degrade the protective film or cause discoloration.
