Glazing Compound WD-AC-610
Water-Based Protective & Decorative Finish for Textured Surfaces | Kraski Breez
Purpose & Key Features
Glazing Compound WD-AC-610 is a flexible, breathable, water-dispersion topcoat designed for the decorative enhancement and durable protection of textured mineral surfaces.
Core Functions:
- Forms a silky, soft-to-the-touch film with a Soft-Feel effect
- Accentuates texture and color depth of the underlying layer
- Provides robust protection while preserving the substrate’s natural “breathability”
Available in two elegant finishes:
- Matte – for a refined, velvety, low-sheen aesthetic
- Satin – for a subtle glow that highlights surface relief and dimension
Suitable for both interior and exterior use, including façades, bathrooms, kitchens, and other demanding environments.
Performance Characteristics
- Wear-resistant – withstands abrasion and moderate mechanical stress
- Eco-friendly – non-toxic, safe for sensitive environments
- Vapour-permeable – maintains healthy moisture exchange
- Water-repellent – enhances moisture resistance without sealing pores
- Odour-neutral – does not absorb or retain smells
- UV-stable – resists yellowing and fading in sunlight
- Low dirt retention – stays cleaner longer
- Washable – compatible with damp cleaning after curing
Applications
Recommended as a final finish for:
- Venetian and structural plasters
- Microconcretes and microcements
- Tinted mineral coatings
- Textured paints and other porous decorative surfaces
Approved for use in:
- Residential spaces (including children’s rooms)
- Healthcare and educational facilities
- Restaurants, cafés, and public catering areas
- Offices and administrative buildings
Substrate Requirements
Apply to properly prepared mineral surfaces:
- Concrete | Concrete blocks
- Brick masonry
- Cement render & plasters
- Gypsum | Gypsum board | Gypsum panels
Surface must be:
- Uniform
- Smooth and leveled
- Dry
- Clean and dust-free
Preparation:
- Remove loose or flaking material
- Repair defects with plaster or spackling compound
- Sand with fine-grit paper (P180–P220)
- Dust thoroughly with a soft brush or vacuum
Coverage & Application
- Consumption: 0.1–0.15 kg/m²
Varies depending on:- Surface porosity and relief
- Desired sheen intensity
- Application:
- Apply 1–2 thin, even coats (avoid thick layers to prevent runs)
- Use a soft brush, roller, or spray gun for uniform finish
Maintenance
After full curing (24–48 hours):
- Clean with damp cloth and pH-neutral household cleaners
Avoid:
- Acidic cleaners (e.g., vinegar, citric acid)
- Caustic or alkaline agents (e.g., bleach, ammonia)
- Aggressive or abrasive detergents
These may damage the protective film or cause staining.
Shelf Life
12 months from the date of manufacture when stored in the original, tightly sealed container in a dry place at +5°C to +25°C.
Design Value
Glazing Compound WD-AC-610 is the professional’s choice for finishing decorative projects—where tactile sophistication meets long-term performance.
It doesn’t just protect—it elevates. By enhancing depth, softness, and luminosity, it ensures that every textured surface, from an artisanal wall in a private residence to an urban façade, remains visually compelling and durably refined for years to come.
| Kraski Breez – The Final Touch of Refined Protection
