Decorative Plaster "Samаn" (WD-AC-566)
A unique, fiber-reinforced structural plaster inspired by traditional adobe masonry—the natural blend of clay and straw. Unlike conventional textured plasters, "Samаn" integrates reinforcing fibers that deliver both enhanced durability and a distinctive handcrafted aesthetic, making it ideal for expressive architectural finishes in interior and exterior applications.
Key Features & Artistic Capabilities
- Paste-like consistency that holds shape and effectively conceals microcracks—both on the surface and beneath the coating
- Extended open time simplifies application and modeling, even for complex relief techniques
- Buildable up to 2 cm while maintaining volume and structural integrity
- Versatile application methods:
• Mazanka (hand-troweled earthen texture)
• Byzantine and chekanka (stamped/embossed patterns)
• Stencil work - Wet-brushing allows softening of edges and seamless transitions
- Exposed fibers at the edges of each stroke emphasize the raw, artisanal character
- When applied smoothly, it naturally develops a fine "orange peel" texture
- Authentically mimics rough-hewn stone
- Can be used as a modeling mass for small-scale bas-reliefs and decorative elements
- Tintable and compatible with a wide range of decorative topcoats, glazes, and aging agents
Performance Characteristics
✔ Wear-resistant
✔ Eco-friendly
✔ Vapor-permeable
✔ Odor-resistant
✔ Moisture-resistant
Substrate Requirements
Suitable mineral surfaces:
• Concrete
• Concrete blocks
• Brick masonry
• Cement and cement plaster
• Gypsum
• Gypsum board and plasterboard panels
• Other comparable mineral substrates
Surface condition:
• Uniform
• Smooth and leveled
• Dry
• Clean
Preparation steps:
• Remove loose or flaking coatings
• Repair cracks and chips with plaster or filler
• Sand with fine-grit paper
• Dust off thoroughly with a soft brush or vacuum
Required surface quality: Q2 standard
Recommended Application System & Consumption
|
Step |
Product |
Purpose |
Consumption (smooth surface) |
|---|---|---|---|
|
1 |
Universal Deep-Penetrating Primer (WD-AC-007) |
Strengthens, dust-proofs, enhances adhesion |
0.1–0.2 kg/m² (1 coat) |
|
2 |
Quartz Primer (WD-AC-558) |
Improves bonding and creates uniform base |
0.15–0.3 kg/m² |
|
3 |
Decorative Plaster "Samаn" (WD-566) |
Final textured finish |
1.0–5.0 kg/m² (depending on layer thickness and technique) |
Consumption varies significantly: from thin textured layers (~1 kg/m²) to full relief up to 2 cm thick (~5 kg/m²).
Maintenance
- Wet cleaning permitted with mild household detergents after full drying
- Avoid:
• Acidic or caustic cleaners (risk of staining or surface damage)
• High-pressure washing on delicate reliefs
Shelf Life
12 months from the date of manufacture when stored in original, unopened, hermetically sealed packaging under standard conditions.
